Stability and Transparency Analysis of a Teleoperation Chain For Microscale Interaction.

International audienceMicroscale teleoperation with haptic feedback requires scaling gains in the order of 104 107. These high gains impose a trade-off between stability and transparency. Due to the conservative approach used in most designs, transparency is reduced since damping is added to the system to guarantee stability. Starting from the fact that series, negative feedback and parallel connection of passive systems is a passive system, a new approach is addressed in this work. We propose here a complete teleoperation chain designed from the ground up for full transparency and stability, including a novel self-sensing probe and a high fidelity force-feedback haptic interface. By guaranteeing the passivity of each device and assuming that the human operator and the environment are passive systems, a homothetic direct coupling can be used without jeopardizing the stability and provides best transparency. The system is experimentally demonstrated in the complex case of a probe interacting with a water droplet under human control, while accurately transcribing the interaction back to operator

KiloHertz Bandwidth, Dual-Stage Haptic Device Lets You Touch Brownian Motion

This paper describes a haptic interface that has a uniform response over the entire human tactile frequency range. Structural mechanics makes it very difficult to implement articulated mechanical systems that can transmit high frequency signals. Here, we separated the frequency range into two frequency bands. The lower band is within the first structural mode of the corresponding haptic device while the higher one can be transmitted accurately by a fast actuator operating from conservation of momentum, that is, without reaction forces to the ground. To couple the two systems, we adopted a channel separation approach akin to that employed in the design of acoustic reproduction systems. The two channels are recombined at the tip of the device to give a uniform frequency response from DC to one kHz. In terms of mechanical design, the high-frequency transducer was embedded inside the tip of the main stage so that during operation, the human operator has only to interact with a single finger interface. In order to exemplify the type of application that would benefit from this kind of interface, we applied it to the haptic exploration with microscopic scales objects which are known to behave with very fast dynamics. The novel haptic interface was bilaterally coupled with a micromanipulation platform to demonstrate its capabilities. Operators could feel interaction forces arising from contact as well as those resulting from Brownian motion and could manoeuvre a micro bead in the absence of vision

Modelling the air-gap field strength of electric machines to improve performance of haptic mechanisms

The air-gap of electro-magnetic (EM) actuators determines key operating parameters such as their ability to generate force. In haptic devices these parameters are not optimised for the conditions typically seen in operation and include the heat produced in the air-gap, the volume of the air-gap, and the intensity and direction of the magnetic field. The relationship between these parameters is complex thus design decisions are difficult to make. This paper considers the role of the radial magnetic field in cylindrical electric motors, a type often used in haptic devices. Two models are derived and compared with experimental measurements. The first model is a closed form solution, the second is a classic Poisson solution to Ampere's equation. These models are shown to be valid for making more general design decisions in relation to haptic actuators, and in particular allow an evaluation of the trade off between the volume of the air-gap, the resulting radial magnetic field and hence heat generated and the resulting forces